D.Uhr Aviation Art
He 343A-1, which was to be the bomber version. Depending on the engines used, the bomb load ranged between 2000 kg to 3000 kg, with 2000 kg to be carried internally, and 1000 kg to be carried externally. Trials were to be held with the Fritz X radio controlled bomb, which would have also added…
read more
The Multi-Unit Space Transport And Recovery Device or MUSTARD, usually written as Mustard, was a concept explored by the British Aircraft Corporation (BAC) during the mid-1960s for launching payloads weighing as much as 2,300 kg (5,000 lb) into orbit. Operating as a multi-stage rocket for launch, the individual stages were near-identical modules, each flying back to land as a spaceplane. Mustard was a modular re-usable space…
read more
The Blohm & Voss P 202 was an unusual design study for a variable-geometry jet fighter during World War II. It was the first design to incorporate a slewed wing (also known as an oblique or scissor wing) in which one side swept forward and the other back. This 1944 Richard Vogt’s design was powered by two…
read moreAn oblique wing (also called a slewed wing) is a variable geometry wing concept. On an aircraft so equipped, the wing is designed to rotate on center pivot, so that one tip is swept forward while the opposite tip is swept aft. By changing its sweep angle in this way, drag can be reduced at…
read more
A recent work I did Here I show few steps. They are divided in 5 steps and the main idea is to show the importance to know the aircraft structure before you start to draw, to paint, to illustrate or generate it in a 3D software. Research is really important, as well as some other…
read more
A variable-sweep wing, colloquially known as a “swing wing”, is an airplane wing, or set of wings, that may be swept back and then returned to its original position during flight. It allows the aircraft’s shape to be modified in flight, and is therefore an example of a variable-geometry aircraft. Typically, a swept wing is…
read more